f f do not scale from this print .285 7.24 ref 1.8525 ref 47.054 .245 6.223 ref .0988 ref 2.508 (no of positions x .0250[.635]) + .1725[4.382] ref 01 02 aso only (application specific order) bss-xxx-01-x-d-dp-emx no of positions -016, -034, -050, *-066, *-084, *-100 row specification -d: double (use bss-xxx-01-d-emx) plating specification -l: light selective gold with matte tin tails (use c-162-xx-l) -f: flash selective gold with matte tin tails (use c-162-xx-f) -h: heavy gold (use c-162-xx-h) lead style -01 edge mount thickness -em2: .064[1.63] .004 pcb (use bss-xxx-01-d-em2 & c-162-01-x) differential pairs -em3: (use bss-xxx-01-d-em3 & c-162-02-x) see note 7 .120 ref 3.05 .175 ref 4.45 .135 3.43 ref .0060 ref 0.152 1.2250 31.115 .0250 0.635 .1538 3.905 (typ) 2 max sway "a" "a" c1 c2 .040 ref 1.02 .140 ref 3.56 .100 2.54 ref .0660 .0030 1.676 0.076 .2530 6.426 section "a-a" edge mount thickness -em2: .064[1.63] .004 pcb c-162-01-x bss-xxx-01-d-em2 .0920 .0030 2.337 0.076 section "a-a" (different as shown, otherwise same as -em2 pcb thickness) c-162-02-x bss-xxx-01-d-em3 edge mount thickness -em3: see note 7 tube: pt-1-24-02-38 plug: tp-03 packaging view c fig. 1 bss-034-01-x-d-dp-em2 shown * see note 8 c3 c4 sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01[.3] 2 .xxx: .005[.13] .xxxx: .0020[.051] material: .635mm edge mount dp socket assembly by: bss-xxx-01-x-d-dp-emx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing chad f 10/4/2001 2 1 sheet scale: 1.5:1 insulator: vectra e130i, color: black contact: phos bronze, 510 spring temper thickness: .0060 f:\dwg\misc\mktg\bss-xxx-01-x-d-dp-emx-mkt.slddrw notes: 1. represents a critical dimension. 2. contact retention: 4 oz min. 3. parts are "mold to position". 4. max variance of .002. 5. all pin to pin dimensions to be measured from tip to tip. 6. note deleted. 7. -em3 is not a standard offering; available as an asp only. please contact samtec interconnect processing group with order inquiries 8. for new applications requiring these positions. please contact samtec interconnect group. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision f
1.2275 31.179 .5500 13.970 c9 bss-025-01-emx bss-016-01-x-d-dp-emx 2.4775 62.929 1.8280 46.431 c8 bss-075-01-emx bss-050-01-x-d-dp-emx 3.1025 78.804 2.4280 61.671 bss-066-01-x-d-dp-emx bss-100-01-emx c7 3.7275 94.679 3.1030 78.816 c6 bss-084-01-x-d-dp-emx bss-125-01-emx 4.3525 110.554 3.7000 93.980 c5 bss-100-01-x-d-dp-emx bss-150-01-emx fig. 2 front view of all positions (except -034) to show position locations (different as shown, otherwise same as fig. 1) sheet of .635mm edge mount dp socket assembly by: bss-xxx-01-x-d-dp-emx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing chad f 10/4/2001 2 2 sheet scale: 2:1 revision f f:\dwg\misc\mktg\bss-xxx-01-x-d-dp-emx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
